Carving Stand – Wood Carving Project (Tool Build)

July 20, 2020

I’ve been spending a lot of time wood carving lately and so decided to make a carving stand so I can save my back a bit when carving and see around a carving more easily.

In this video you’ll see how I made the stand including a movable shelf to hold the carving in place at various heights. You could use this in conjunction with a wood carvers screw or perhaps some other kind of wood carving clamp.

There are many other ways to make a carving stand and I’m sure there must be other videos out there. This was made with a scaffold board, some scrap plywood and scrap oak.

I should also point out that the reason the stand is facing sideways to the bench is because I get more natural light that way and it’s also better for my viewers on Twitch and for video making.

Thank you for viewing, check out the various links below if you’d like to see what else I get up to.

– – – – – – – – – – – – – – – – – – – –

Twitch – https://www.twitch.tv/timberanew

Skillshare – https://www.skillshare.com/classes/Introduction-to-Letter-Carving-in-Wood-Making-a-Sign/671949912

Instagram – @timberanew https://instagram.com/timberanew

Facebook – https://www.facebook.com/timberanew

– – – – – – – – – – – – – – – – – – – –

Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)

Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX – Amazon US

Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe – Amazon US

DeWalt Filip Drive Kit :
http://amzn.to/2DllajS – Amazon US

Bahco Fret Saw :
http://amzn.to/2p4A4Xq – Amazon US